Easy and simple to install

Our artworks are designed to be easy and simple to install. Unlike most other acoustic solutions where the installation is more permanent, we designed our artworks to be as mobile and playful as possible. This means that you can personalize and make your own expression by turning the artworks after your own preference.

What you need

(Not included)
Pencil, ruler, two screws and two fasteners on a grey background.

1 x Pencil
1 x Level
2 x Screws per artwork
2 x Rawlplugs per artwork
Hammer and a drill bit on a grey background.

1x Drill
1x Hammer
Drill power tool on a gray background.

1x Drilling machine

Included in your package
Mount for acoustic artwork.

1 x Loose wall mount per artwork

Instructions
Acoustic panel leaning on a wall.

1. Determine placement

Decide where you want to hang the acoustic artworks in your space, considering both aesthetic and acoustic needs.

Tip:
It can be a good idea to place the acoustic artworks close to where the sound is often created. Ex. by your dining table, couch, office table etc.

Tools for installing acoustic panels laying on a sheet.

2. Gather tools and artworks

Make sure you have the necessary tools handy - check the list above to see what you need for the mounting.

Note the difference between "not included" and "included" in your arturel package.
Person measuring a wall for drilling.

3. Measure height placement of your pieces

Take your ruler and your loose wall mount and use them to measure the correct height/placement on the wall.
Person mounting a mount with a nail into a wall with a hammer

4. Mark placement on your wall

Mark the placement on your wall using the loose wallmount and a level to accurately measure and mark the positions on the wall where you would like to install the artworks.

Tip:

Hanging multiple 60x60 cm Tiles together without spacing:

The horisontal space between center-to-center of the wallmounts should be 60 cm.
The vertical space should be 59,9 cm from the buttom of the wall mount to the next wallmount bottom (the 0,1 cm difference is for the interlocking of the mount on the piece and the wall mount).

Person drilling a hole in a white brick wall.

5. Drill and rawlplugs

Remove the loose wall mount again and drill two holes on your marked position.
Insert the rawlplugs securely into the holes using a hammer.

6. Install the loose wall mount

Take your loose wall mount and place it on the wall, so the "pointy" site is facing up and out from the wall.

Use the two screws and install the wall mount using a level to place it correctly.
Man hanging a dark acoustic panel on a white wall.

7. Place your artwork

Take your artwork and use the mounts on the artwork to hang on the wall mount.

Each artwork has multiple hangers on the back, so you can change and turn the artwork to your preference.

Use the playful design to create your own expression or change it when you'd like to renew a little.

8. Add more pieces to your collection

We hope the guide was helpful. If you need assistance, please contact us

Looking to get inspired?

Bedroom

Coming soon

Living room

Coming soon

Kitchen

Coming soon

Entrance

Coming soon

Dining room

Coming soon

Meeting room

Coming soon