Installation guide

Easy and simple to install

Our artworks are designed to be easy and simple to install. Unlike most other acoustic solutions where the installation is more permanent, we designed our artworks to be as mobile and playful as possible. This means that you can personalize and make your own expression by turning the artworks after your own preference.

What you need

(Not included)

1 x Pencil
1 x Level
2 x Screws per artwork
2 x Rawlplugs per artwork

1x Drill
1x Hammer

1x Drilling machine

Included in your package

1 x Loose wall mount per artwork

Instructions

1. Determine Placement

Decide where you want to hang the acoustic artworks in your space, considering both aesthetic and acoustic needs.

Tip:

It can be a good idea to place the acoustic artworks close to where the sound is often created. Ex. by your dining table, couch, office table etc.

2. Gather Tools and artworks

Make sure you have the necessary tools handy - check the list above to see what you need for the mounting.

Note the difference between "not included" and "included" in your arturel package.

3. Measure height placement of your pieces

Take your ruler and your loose wall mount and use them to measure the correct height/placement on the wall.

4. Mark placement on your wall

Mark the placement on your wall using the loose wallmount and a level to accurately measure and mark the positions on the wall where you would like to install the artworks.

Tip:

Hanging multiple 60x60 cm Tiles together without spacing:

The horisontal space between center-to-center of the wallmounts should be 60 cm.
The vertical space should be 59,9 cm from the buttom of the wall mount to the next wallmount bottom (the 0,1 cm difference is for the interlocking of the mount on the piece and the wall mount).